Nanomaterials

  1. G.L. Warren, L. Sun, V.G. Hadjiev, D. Davis, D. Lagoudas, and H.-J. Sue, “B-Staged Epoxy/SWCNT Nanocomposite Thin Films for Composites Reinforcement”, J. Appl. Polym. Sci., accepted.
  2. L. Sun, J.Y. O’Reilly, C.-W. Tien, and H.-J. Sue, “Preparation of Electrically Conductive Polystyrene/Carbon Nanofiber Nanocomposite Films”, J. Chem. Education, in press.
  3. L. Sun, W.J. Boo, A. Clearfield, H.Q. Pham, and H.-J. Sue, “Barrier Properties of Model Epoxy Nanocomposites”, J. Mem. Sci., 318, 129-136(2008).
  4. L. Sun, G.L. Warren, S.M. Lee, J.Y. O’Reilly, D. Davis, D. Lagoudas and H.-J. Sue, “Mechanical Properties of Surface-Functionalized Epoxy/SWCNT Nanocomposites”, Carbon, 46, 320-328(2008).
  5. C. He, T. Liu, W.C. Tjiu, H.-J. Sue, and A.F. Yee, “Deformation and Fracture Mechanisms in Polyamide 6/Organoclay Nanocomposites”, Macromolecules, 41, 193-202(2008).
  6. L. Sun, W.J. Boo, C. Tien, J. Liu, H. Pham, and H.-J. Sue, “Preparation of Intercalation Agent-Free Epoxy/Clay Nanocomposites”, Polym. Eng. Sci., 47, 1708-1714(2007).
  7. W.J. Boo, L. Sun, J. Liu, A. Clearfield, and H.-J. Sue, “Effective Intercalation and Exfoliation of Nanoplatelets in Epoxy via Creation of Porous Pathways”, J. Phys. Chem., 111, 10377-10381(2007).
  8. D. Sun, M. Wong, L. Sun, Y. Li, N. Miyatake and H.-J. Sue, “Purification and Stabilization of Colloidal ZnO Nanoparticles in Methanol”, J. Sol-Gel Sci. Tech., 43, 237-243(2007).
  9. D. Sun, N. Miyatake and H.-J. Sue, “Transparent PMMA/ZnO Nanocomposite Films Based on Colloidal ZnO Quantum Dots”, Nanotechnology, 18, 215606(2007).
  10. W.J. Boo, L. Sun, J. Liu, E. Moghbelli, A. Clearfield, H. Pham, N. Verghese and H.-J. Sue, “Effect of Nanoplatelet Dispersion on Mechanical Behavior of Polymer Nanocomposites”, J. Polym. Sci.-Polym. Phys. Ed., 45, 1459-1469(2007).
  11. L. Sun, W.J. Boo, A. Clearfield, and H.-J. Sue, “Preparation of Exfoliated Epoxy/α-Zirconium Phosphate Nanocomposites Containing Ultrahigh Aspect Ratio Nanoplatelets”, Chem. Mater., 19, 1749-1754(2007).
  12. W.J. Boo, L. Sun, G. Warren, E. Moghbelli, A. Clearfield, H. Pham, and H.-J. Sue, “Effect of Nanoplatelet Aspect Ratio on Mechanical Properties of Epoxy Nanocomposites”, Polymer, 48, 1075-1082(2007).
  13. W.J. Boo, L.Y. Sun, J. Liu, A. Clearfield, H. Pham, M. Mullins, and H.-J. Sue, “Morphology and Mechanical Behavior of Fully Exfoliated Epoxy/a-Zirconium Phosphate Nanocomposites”, Comp. Sci. & Tech., 67, 262-269(2007).
  14. L. Sun, W.J. Boo, A. Clearfield, and H.-J. Sue, “Preparation of α-Zirconium Phosphate Nanoplatelets With Wide Variations of Aspect Ratios”, New J. Chem., 31, 39-43(2007).
  15. W.-J. Boo, J. Liu, andH.-J. Sue, “Fracture Behavior of Nanoplatelet-Reinforced Polymer Nanocomposites”, Mater. Sci. & Techn., 22, 829-834(2006).
  16. J.-I. Weon and H.-J. Sue, “Mechanical Properties of Talc- and CaCO3-Reinforced High Crystallinity Polypropylene Composites”, J. Mater. Sci., 41, 2291-2300(2006).
  17. J. Liu, W.-J. Boo, A. Clearfield and H.-J. Sue, “Intercalation and Exfoliation: A Review on Morphology of Polymer Nanocomposites Reinforced by Inorganic Layer Structures”, Mater. Manufacturing Proc., 20, 143-151(2006).
  18. J.-I. Weon, K.-T. Gam, W.-J. Boo, and H.-J. Sue, “Impact Toughening Mechanisms of Calcium Carbonate-Reinforced Polypropylene Nanocomposite”, J. Appl. Polym. Sci., 99, 3070-3076(2006).
  19. J.-I. Weon, Z. Xia and H.-J. Sue, “Morphology of Nylon-6 Nanocomposite Following A Large-Scale Simple Shear Process”, J. Polym. Sci.-Polym. Phys. Ed., 43, 3555-3566(2005).
  20. L. Sun, W.J. Boo, R. Browning, H.-J. Sue, and A. Clearfield, “Effect of Crystallinity on the Intercalation of Monoamine In α-Zirconium Phosphate Layer Structure”, Chem. Mater., 17, 5606-5609(2005).
  21. J.-I. Weon and H.-J. Sue, “Effects of Clay Orientation and Aspect Ratio on Mechanical Behavior of Nylon-6 Nanocomposites”, Polymer, 46, 6325-6334(2005).
  22. R.D. Yang, S. Tripathy, Y. Li, H.-J. Sue, “Ultraviolet Light Emitting ZnO Nanoparticles: Effect of Acetate Capping”, Chem. Phys. Lett., 411, 150-154(2005).
  23. J.C. Stendahl, E.R. Zubarev,  M.S. Arnold, M.C. Hersam, H.-J. Sue, S.I. Stupp, “Structural Modifications to Polystyrene via Self-Assembling Molecules”, Adv. Funct. Mat., 15, 487-493(2005).
  24. H.-J. Sue, K.T. Gam, N. Bestaoui, A. Clearfield, M. Miyamoto and N. Miyatake, “Fracture Behavior of Core-Shell Rubber-Toughened a-Zirconium Phosphate-Based Epoxy Nanocomposites”, Acta Mater, 8, 2239-2250(2004).
  25. H. -J. Sue, K. T. Gam, N. Bestaoui, N. Spurr and A. Clearfield, “Epoxy Nanocomposites Based on Synthetic a-Zirconium Phosphate Layer Structure”, Chem. Mater., 16, 242-249(2004).
  26. T. Gam, M. Miyamoto, R. Nishimura and H.-J. Sue, “Fracture Behavior of Core-Shell Rubber -Modified Clay-Epoxy Nanocomposites”, Polym. Eng. Sci., 43, 1635-1645(2003).

Mechanical Behavior

  1. C.-W. Feng, C.-W. Keong, Y.-P. Hsueh, Y.-Y. Wang, and H.-J. Sue, “Prediction of Long-Term Creep Behavior of Structural Epoxy Adhesives”, Int. J. Adhesion and Adhesives, 25, 427-436(2005).
  2. J.-I. Weon, T.S. Creasy, H.-J. Sue and A.J. Hsieh, “Mechanical Behavior of Polymethylmethacrylate with Molecules Oriented via Extreme Simple Shear”, Polym. Eng. Sci., 34, 314-324(2005).
  3. Z. Xia, T. Hartwig, and H.-J. Sue, "Mechanical Behavior of Bulk Poly(ethylene terephthalate) Subjected to Simple Shear", J. Macromol. Sci.: Phys., B43, 385-403(2004).
  4. J.S.S. Wong, D. Ferrer-Balas, R.K.Y. Li, Y.-W. Mai, M.L. Maspoch, and H.-J. Sue, “On Tearing of Ductile Polymer Films Using the Essential Work of Fracture Method”, Acta Mater., 51, 4929-4938(2003).
  5. B.J. Derkowski and H.-J. Sue, “Morphology and Compression-After-Impact Strength Relationship in Interleaved Toughened Composites”, Polymer Composites, 24, 158-170(2003).
  6. KP Pramoda, TX Liu, ZH Liu, CB He, and H-J Sue, “Thermal Degradation Behavior of Polyamide 6/Clay Nanocomposites”, Polym. Deg. & Sta., 81, 47-56(2003).
  7. W. Zheng, S.-C. Wong, and H.-J. Sue, “Transport Behavior of PMMA/Expanded Graphite Nanocomposites”, Polymer, 43, 6767-6773(2002).
  8. Y. Li, G.-X. Wei and H.-J. Sue, “Morphology and Toughening Mechanisms in Clay-Modified Styrene-butadiene-Styrene Rubber-toughened Polypropylene”, J. Mater. Sci., 37, 2447-2459(2002).
  9. J. Lu and H.-J. Sue, “Morphology and Mechanical Properties of Blown Film of LDPE/LLDPE Blend”, J. Polym. Sci.-Polym. Phys. Ed., 40, 507-518(2002).
  10. A.F. Yee and H.-J. Sue, “Impact Resistance”, Encyclopedia of Polymer Science and Technology, John Wiley & Sons, Online Posting Date: December 13, 2002.
  11. H.-J. Sue, “Failure of Networks”, Ed. by KHJ Buschow, RW Cahn, MC Flemings, B Ilschner, EJ Kramer, S. Mahajan, Encyclopedia of Materials: Science and Technology, Elsevier Science, Oxford, 6, 6113-6116(2001).
  12. Z. Xia, H.-J. Sue, A. Hsieh, and W.-L. Huang, “Dynamic Mechanical Behavior of Oriented Semicrystalline Poly(ethylene terephthalate)”, J. Polym. Sci.-Polym. Phys. Ed., 39, 1394-1403(2001).
  13. Z. Xia, H.-J. Sue, and A. Hsieh, “Impact Fracture Behavior of Molecularly Orientated Polycarbonate Sheets”, J. Appl. Polym. Sci., 79, 2060-2066(2001).
  14. J. Lu, H.-J. Sue, and T. Rieker, “Dual Crystalline Structure in HDPE Blown Films and its Implication on Mechanical Properties”, Polymer, 42, 4635-4646(2001).
  15. G.-X. Wei and H.-J. Sue, “Fracture Behavior of Styrene-Ethylene-Propylene Rubber-Toughened Polypropylene”, Polym. Eng. Sci., 40, 1979-1988(2000).
  16. J. Lu, H.-J. Sue, and T. Rieker, “Morphology and Structure-Property Relationship in LLDPE Blown Films”, J. Mater. Sci., 35, 5169-5178(2000).
  17. K.-Y. Li, Z. Xia, and H.-J. Sue, “Simple Shear Plastic Deformation Behavior of Polycarbonate Plate Due to the Equal Channel Angular Extrusion Process.  II. Mechanical Property Characterization”, Polymer, 41, 6285-6293(2000).
  18. J. Lu, G. Wei, K. Li, and H.-J. Sue, “Fracture Mechanisms in Commercial Thermoplastic Olefin Systems”, J. Appl. Polym. Sci., 76, 311-319(2000).
  19. G.-X. Wei, H.-J. Sue, J. Chu, C. Huang and K. Gong “Toughening and Strengthening of Polypropylene Using The Rigid-Rigid Polymer Toughening Concept. Part II.  Fracture Mechanisms Investigation”, J. Mater. Sci., 35, 555-566(2000).
  20. J. Lu, K. Li, G. Wei, and H.-J. Sue, “Toughening Mechanisms in Aliphatic Polyketones”, J. Mater. Sci., 35, 271-277(2000).
  21. G.-X. Wei, H.-J. Sue, J. Chu, C. Huang and K. Gong “Toughening and Strengthening of Polypropylene Using The Rigid-Rigid Polymer Toughening Concept. Part I.  Morphology and Mechanical Property Investigations”, Polymer, 41, 2947-2960(2000).
  22. H.-J. Sue, P.M. Puckett, J.L. Bertram, and L.L. Walker, “The Network Structure of Epoxy Systems and Its Relationship to Toughness and Toughenability”, Adv. Chem. Ser., 759, 171-197(2000).
  23. R.A. Pearson, H.-J. Sue, A.F. Yee, Co-Editor of Toughening of Plastics, American Chemical Society Symposium Series, 759, 2000.
  24. J. Lu, B. Zhao and H.-J. Sue, “Phase Structure Characterization and Processing-Structure-Property Relationships in Linear Low-Density Polyethylene Blown Films”, in Metallocene Technology and Modern Catalytic Methods in Commercial Applications, Ed. G.M. Benedikt, ChemTec Publishing, Ontario, Canada, 1999.
  25. G. Wei and H.-J. Sue, “Fracture Mechanisms in Preformed Polyphenylene Oxide Particle-Modified Bismaleimide Resins”, J. Appl. Polym. Sci., 74, 2539-2545(1999).
  26. H.-J. Sue, H. Dilan, and K.-Y. Li, “Simple Shear Plastic Deformation Behavior of Polycarbonate Plate Due to the Equal Channel Angular Extrusion Process.  I. Finite Element Methods Modeling”, Polym. Eng. & Sci., 39, 2505(1999).
  27. H.-J. Sue, P.M. Puckett, J.L. Bertram, and E.I. Garcia-Meitin, “Structure and property Relationships in Model Diglycidyl ether of Bisphenol-A and Diglycidyl ether of Tetramethyl Bisphenol-A Epoxy Systems.  I. Mechanical Property Characterizations”, J. Polym. Sci.-Polym. Phys. Ed.,37, 2137(1999).
  28. S.W. Bradley, P.M. Puckett, W.L. Bradley, and H.-J. Sue, “Viscoelastic Creep Characteristics of Neat Thermosets and Thermosets Reinforced with E-Glass”, J. Composites Techn. & Res., 20, 51(1998).
  29. H.-J. Sue, S. Wang and J.-L. Jane, “Morphology and Mechanical Behavior of Engineering Soy Plastics”, Polymer, 38, 5035(1997).
  30. H.-J. Sue, J.D. Earls, and R.E. Hefner, Jr., “Fracture Behavior of Liquid Crystal Epoxy Resin Systems Based on the Diglycidyl Ether of 4,4'-Dihydroxy-a-Methylstilbene and Sulfanilamide.  I. Effects of Curing Variations”, J. Mater. Sci., 32, 4031(1997).
  31. H.-J. Sue, J.D. Earls, and R.E. Hefner, Jr., “Fracture Behavior of Liquid Crystal Epoxy Resin Systems Based on the Diglycidyl Ether of 4,4'-Dihydroxy-a-Methylstilbene and Sulfanilamide.  II. Effect due to Blending with TACTIX 556 Epoxy Resin and Phenolic Monomers”, J. Mater. Sci., 32, 4039(1997).
  32. M.R. Groleau, Y.-B. Shi, A.F. Yee, J.L. Bertram, H.-J. Sue and P.C. Yang, "The Effect of Nylon particle Interleaving on the Mode II Toughness of Composites", Comp. Sci. Tech., 56, 1223(1996).
  33. S. Wang, H.-J. Sue, and J.-L. Jane, "Effects of Polyhydric Alcohol on Mechanical Properties of Soy-Protein Plastics", J. of Macromolecular Science: Pure and Applied Chem. A33, 557(1996).
  34. H.-J. Sue and A.F. Yee, "Micromechanical Modeling on Effects of Crack Tip Particle Cavitational Process in Polymer Toughening", Polym. Eng. Sci., 36, 2320(1996).
  35. H.-J. Sue, E.I. Garcia-Meitin, and D.M. Pickelman, "Fracture Mechanisms in Rigid Core-Shell Particle-Modified High Performance Epoxies", Colloid & Polym. Sci., 274, 342(1996).
  36. H.-J. Sue, P.C. Yang, P.M. Puckett, J.L. Bertram, and E.I. Garcia-Meitin, "Crazing and Dilatation Band Formation in Engineering Thermosets", Toughened Plastics II: Science and Engineering, Ed. by C.K. Riew and A.J. Kinloch, Adv. Chem. Ser., 252, 161-175(1996).
  37. H.-J. Sue, E.I. Garcia-Meitin, and D.M. Pickelman, "Fracture Mechanisms in High Performance Epoxies", Chap. 5 in Polymer Toughening, Ed. by C.B. Arends, Marcel Dekker. 1996.
  38. P.C. Yang, H.-J. Sue, and M.T. Bishop, "Crazing in Intrinsically Tough High Performance Thermoset Resins", Chap. 4 in Polymer Toughening, Ed. by C.B. Arends, Marcel Dekker. 1996.
  39. H.-J. Sue and K.-J. Wang, "Impact Fracture Mechanisms Investigation of RIM Composites", J. Polym. Res., 2, 163(1995).
  40. H.-J. Sue, P.M. Puckett, E.I. Garcia-Meitin, and J.L. Bertram, "Characterization and Promotion of Dilatation Bands in Toughenable Thermosets", J. Polym. Sci. Polym. Phys. Ed., 33, 2003(1995).
  41. H.-J. Sue, J.L. Bertram, E.I. Garcia-Meitin, and L.L. Walker, "Fracture Behavior of Core-Shell Rubber-Modified Crosslinkable Epoxy Thermoplastics", Colloid & Polym. Sci., 272, 456(1994).
  42. E.I. Garcia-Meitin and H.-J. Sue, "Study of Morphology and Toughening Mechanisms of High Performance Graphite Fiber Composites Using TEM”, Polymer Composites, 15, 165(1994).
  43. H.-J. Sue, J.W. Wilchester, C.H. Wang, and D.L. Caldwell, "Fatigue Fracture Behavior of Chlor-Alkali Membranes", J. Appl. Polym. Res., 1, 205(1994).
  44. H.-J. Sue, R.E. Jones, and E.I. Garcia-Meitin, "Fracture Behavior of Model Toughened Composites Under Mode-I and Mode-II Delamination", J. Mater. Sci., 28, 6381(1993).
  45. H.-J. Sue, E.I. Garcia-Meitin and P.C. Yang, "Effect of Rubber-Clustering in Composite Toughening --Model Systems Study", Composites, 24, 495(1993).
  46. H.-J. Sue, P.C. Yang, E.I. Garcia-Meitin, and M.T. Bishop, "Crazing in High Performance Thermosets", J. Mater. Sci. Letters, 12, 1463(1993).
  47. H.-J. Sue and A.F. Yee, "Study of Fracture Mechanisms of Multi-Phase Polymers Using the Double-Notch Four-Point-Bend Method", J. Mater. Sci., 28, 2915(1993).
  48. H.-J. Sue, E.I. Garcia-Meitin, and N.A. Orchard, "Toughening of Brittle Epoxies via Craze-Like Damage", J. Polym. Sci., Polym. Phys. Ed., 31, 595(1993).
  49. H.-J. Sue and D.M. Pickelman, "Toughening Concept in High Performance Epoxies", Chap. 18 in Elastomer Technology Handbook, Ed. by N.P. Cheremisinoff, CRC Press, Boca Raton, Florida, 1993.
  50. H.-J. Sue, J. Huang and A.F. Yee, "Interface and Toughening Mechanisms in an Alloy of Polyethylene/Polycarbonate", Polym. Communication, 33, 4868(1992).
  51. H.-J. Sue, "Craze-Like Damage in Rubber-Modified Epoxy", J. Mater. Sci., 27, 3098(1992).
  52. H.-J. Sue, R.A. Pearson and A.F. Yee, "Mechanical Modeling of Initiation of Localized Yielding Under Plane Stress Conditions in Rigid-Rigid Polymer Alloys", Polymer Eng. Sci., 31, 793(1991).
  53. H.-J. Sue and A.F. Yee, "Failure Mechanisms in an Alloy of Polyamide 6,6/Polyphenylene Oxide Under Severe Conditions", J. Mater. Sci., 26, 3449(1991).
  54. H.-J. Sue, "Study of Rubber-Modified Brittle Epoxy Systems.  I.  Fracture Toughness Measurements Using the DN-4PB Method", Polym. Eng. Sci., 31, 270(1991).
  55. H.-J. Sue, "Study of Rubber-Modified Brittle Epoxy Systems. II.  Toughening Mechanisms Under Mode-I Fracture, Polym. Eng. Sci., 31, 275(1991).
  56. D.S. Parker, H.-J. Sue, J. Huang, and A.F. Yee, "Toughening Mechanisms in Core-Shell Rubber-Modified Polycarbonate Systems", Polymer, 31, 2267(1990).
  57. H.-J. Sue and A.F. Yee, "Toughening Mechanisms in a Multi-Phase Alloy of Nylon 6,6/ Polyphenylene Oxide", J. Mater. Sci., 24, 1447(1989).
  58. H.-J. Sue and A.F. Yee, "The Deformation Behavior of a Polycarbonate Plate with a Circular  Hole: Finite Elements Model and Experimental Observations", Polymer, 29, 1619(1988).

Scratch Behavior

  1. R.L. Browning, H. Jiang, and H.-J. Sue, “Scratch Behavior of Polymeric Materials”, Tribology of Polymer Nanocomposites, Elsevier B.V., in press.
  2. H. Jiang, R.L Browning, J. Fincher, and H.-J. Sue, “Influence of Surface Roughness and Contact Load on Friction Coefficient and Scratch Behavior of Thermoplastic Olefins”, Appl. Surface Sci., 254, 4494-4499(2008).
  3. R.L Browning, H. Jiang, A. Moyse, H.-J. Sue, K. Ohtani and Y. Ijichi and Y. Iseki, “Scratch Behavior of Soft TPOs: Effect of Ethylene Content and Testing Rate”, J. Mater. Sci., 43, 1357-1365(2008).
  4. E. Moghbelli, R.L. Browning, W.-J. Boo, S.F. Hahn, L.J.E. Feick, and H.-J. Sue, “Effects of Molecular Weight and Thermal History on Scratch Behavior of Polypropylene Thin Sheets”, Tribology Int., 41, 425-433(2008).
  5. H. Jiang, G.T. Lim, J.D. Whitcomb, and H.-J. Sue, “FEM Parametric Study on Scratch Behavior of Polymers”, J. Polym. Sci.-Polym. Phys. Ed., 45, 1435-1447(2007).
  6. R.L Browning, H.-J. Sue, K. Ohtani and Y. Ijichi and Y. Iseki, “Scratch Behavior of EPR-Rich TPOs”, Key Eng. Mater., 334, 557-560(2007).
  7. R.L Browning, G.-T. Lim, A. Moyse, H.-J. Sue, H. Chen and  J.D. Earls, “Quantitative Evaluation of Scratch Resistance of Polymeric Coatings Based on a Standardized Progressive Load Scratch Test”, Surface & Coatings Techno., 201, 2970-2976(2006).
  8. R. Browning, G. Lim, A. Moyse, L. Sun, H.-J. Sue, “Effects of Slip Agent and Talc Surface Treatment on the Scratch Behavior of TPOs”, Polym. Eng. Sci., 46, 601-608(2006).
  9. G.T. Lim, M. Wong, A. Moyse, H.-J. Sue, and E. K.-L. Lau, “Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine”, ASTM Standard, D 7027-05.
  10. G.T. Lim, M.-H. Wong, A. Moyse, J.N. Reddy and H.-J. Sue, “An Integrated Approach Towards the Study of Scratch Damage of Polymer”, Ed. by Phil V Yaneff, Special Issue at J. Coating Techno., 2, 361-369(2005).
  11. G.T. Lim, J.N. Reddy and H.-J. Sue, “Finite Element Modeling for Scratch Damage of Polymers”, Chap. 10 in Stimuli-Responsive Polymeric Films and Coatings, Ed. by M. Urban, ACS Symposium Series, 912, 166-180(2005).
  12. M. Wong, G.T. Lim, A. Moyse, F. Lee and H.-J. Sue, “Study of Surface Damage of Polypropylene Under Progressive Loading”, J. Mater. Sci., 39, 3293-3308(2004).
  13. M. Wong, G.T. Lim, A. Moyse, J.N. Reddy, and H.-J. Sue, “A New Scratch Test Method for Polymers”, Wear, 256, 1214-1227(2004).
  14. J.S.S. Wong, H.-J. Sue, K.-Y. Zeng, R.K.Y. LI, and Y.-W. Mai, “Surface Damage of Polymers in Nanoscale”, Acta Mater., 52, 431-443(2004).
  15. J.S.S. Wong and H.-J. Sue, “Scratch Behavior of Polymers”, Encyclopedia of Polymer Science and Technology, John Wiley & Sons, DOI: 10.1002/0471440264.pst496, 2004.
  16. C. Xiang and H.-J. Sue, “Iosipescu Shear Deformation and Fracture in Model Thermoplastic Olefins”, J. Appl. Polym. Sci., 82, 3201-3214(2001).
  17. C. Xiang, H.-J. Sue, J. Chu, B. Coleman, “Scratch Behavior and Material Property Relationship in Polymers”, J. Polym. Sci.-Polym. Phys. Ed., 39, 47-59(2001).
  18. C. Xiang, H.-J. Sue, J. Chu, and K. Masuda, “Role of Additives on Scratch Resistance of High Crystallinity PP Copolymers”, Polym. Eng. Sci., 41. 23-31(2001).
  19. J. Chu, C. Xiang, H.-J. Sue, and R. Hollis, “Scratch Resistance of Mineral-Filled Polypropylene Materials”, Polym. Eng. Sci., 40, 944-955(2000).

Other Research Topics

  1. Y. Oh, C.S. Suh and H.-J. Sue, “On Failure Mechanisms in Flip Chip Assembly - Part 2: Optimal Underfill and Interconnecting Materials”, ASME J. Electron. Packag., 130, 021008-11 (2008).
  2. Y. Oh, C.S. Suh and H.-J. Sue, “On Failure Mechanisms in Flip Chip Assembly - Part 1: Short-Time Scale Wave Motion”, ASME J. Electron. Packag., 130, 021009-8 (2008).
  3. W.N. Everett, J. Jan, H.-J. Sue, and J.C. Grunlan, “Micropatterning and Impedance Characterization of an Electrically Percolating Layer-by-layer Assembly”, Electroanalysis, 19, 964-972(2007).
  4. W.N. Everett, H.-J. Wu, S.G. Anekal, H.-J. Sue, and M.A. Bevan, “Diffusing Colloidal Probes of Protein and Synthetic Macromolecule Interactions”, Biophysical J., 92, 1005-1013(2007).
  5. Z.-G. Wang, Z.-Y. Xia, Z.-Q. Yu, E.-Q. Chen, H.-J. Sue, C.C. Han, and B.S. Hsiao, “Lamellar Formation and Relaxation in Simple Sheared PET by SAXS”, Macromolecules, 39, 2930-2939(2006).
  6. W. Shu, W.N. Everett, Q. Zhang, M. Lui, A. Trigg, Y.X. Ma, M. Spearing, S. Wang, H.-J. Sue, and P.M. Moran, “Microheated substrates for patterning cells and controlling development”, J. MEM, 14, 924-934(2005).
  7. R. Ribeiro, R.J. Morgan, L. Bonnaud, J. Lu, H.-J. Sue, J. Choi, and V. Lopata, “Characterization of the E-Beam Curing of Cationic Polymerization of DGEBA Epoxy Resin”, J. Composite Mater., 39, 1433-1447(2005).
  8. X. Tang, J. D. Whitcomb, Y. Li and H.-J. Sue, “Micromechanics Modeling of Moisture Diffusion in Woven Composites”, Composites Sci. Tech., 65, 817-826(2005).
  9. Y.T. Li, R.J. Morgan, F. Tschen, H.-J. Sue, and V. Lopata, “Electron-Beam Curing of Bismaleimide-Reactive Diluent Resins”, J. Appl. Polym. Sci., 94, 2407-2416(2004).
  10. Y. Li and H.-J. Sue, “Moisture Diffusion Behavior in Bismaleimide Resin Subjected to Hygrothermal Cycling”, Polym. Eng. Sci., 42, 375-381(2002).
  11. G. Tao, A. Gong, J. Lu, H.-J. Sue and D.E. Bergbreighter, “Surface Functionalized Polypropylene: Synthesis, Characterization and Adhesion properties”, Macromolecules, 34, 7672-7679(2001).
  12. Z. Xia, H.-J. Sue, Z. Wang, C.A. Avila-Orta, and B.S. Hsiao, "Determination of Crystalline Lamellar Thickness in Polyethyleneterephthalate Using Small-Angle X-Ray Scattering and Transmission Electron Microscopy", J. Macromol. Sci.: Phys., B40, 625-638(2001).
  13. J. Lu and H.-J. Sue, “Characterization of Crystalline Texture of LLDPE Blown Films Using X-Ray Pole Figures”, Macromolecules, 34, 2015-2017(2001).
  14. Fainleib, J. Galy, J.-P. Pascult, and H.-J. Sue, “Influence of Sequence of Chemical Reactions on Kinetics and Solid State Behavior for Bisphenol A Diglycidyl Ether-Bisphenol A - Sulfanilamide Ternary Blends”, Mater. Res. Innov., 4, 179-186(2001).
  15. Y. Li, J. Miranda and H.-J. Sue, “Hygrothermal Diffusion Behavior in Bismaleimide Resin”, Polymer, 42, 7791-7799(2001).
  16. Fainleib, J. Galy, J.-P. Pascult, and H.-J. Sue, “Two Ways of Synthesis of Polymer Networks Based on Diglycidyl Ether of Bisphenol A, Bisphenol A, and Sulfanilamide: Kinetics Study”, J. Appl. Polym. Sci., 80, 580-591(2001).
  17. Z. Xia, H.-J. Sue, and T.P. Rieker, “Morphological Evolution of PET During Equal Channel Angular Extrusion Process”, Macromolecules, 33, 8746-8755(2000).
  18. H.-J. Sue and C. K.-Y. Li, “Microstructure Evolution of Linear Low Density Polyethylene in Simple Shear Using the Novel Equal Channel Angular Extrusion Process”, J. Mater. Sci. Letter, 17, 853(1998).
  19. H.-J. Sue, J.D. Earls, R.E. Hefner, Jr., E.I. Garcia-Meitin, P.C. Yang, C.M. Cheatham, and C. Plummer, “Morphology in Diglycidyl Ether of 4,4'-Dihydroxy-a-Methylstilbene-Based Liquid Crystalline Epoxy Composites”, Polymer, 39, 4707(1998).
  20. Q. Lin, A.F. Yee, H.-J. Sue, J.D. Earls, R.E. Hefner, Jr., “Evolution of Structure and Property of Liquid Crystalline Epoxies During Curing”, J. Polym. Sci. Polym. Phys. Ed., 35, 2363(1997).
  21. Q. Lin, A.F. Yee, J.D. Earls, R.E. Hefner, Jr., and H.-J. Sue, “Phase Transformations of a Liquid Crystalline Epoxy During Curing", Polym. Communication, 35, 2679(1994).
  22. H.-J. Sue, E.I. Garcia-Meitin, B.L. Burton, and C.C. Garrison "A Novel Staining Approach for Studying Toughening Mechanisms of Saturated Acrylic Rubber-Modified Polymers", J. Polym. Sci. Polym. Phys Ed., 29, 1623(1991).