Chii-Der (Steve) Suh

Associate Professor, Mechanical Engineering

Director - Institute for Innovation and Design in Engineering

Contact Information

Phone: (979) 845-1417

Fax: (979) 845-3081

E-mail: ssuh@tamu.edu

Departmental Page

Education

  • 1997    Ph.D. Mechanical Engineering, Texas A&M University.
  • 1991    M.S. Mechanical Engineering, Auburn University.
  • 1984    B.S. Mechanical Engineering, Feng-Chia University.

Research Interests

Nonlinear time-frequency control; Laser ultrasonic thermometry; Characterization and control of manufacturing instability; Engineering design; MEMS and NEMS fabrication; High-performance 3D microelectronic packaging; Wave propagation; Thermo-Elasto-Viscoplastodynamics.

Experience

  • 2008 – Present           Director, Institute for Innovation and Design in Engineering
  • 2004 – Present           Associate Professor, Texas A&M University
  • 1998 – 2004                Assistant Professor
  • 1997 – 1998                Post-Doctoral Fellow, Space Power Institute, Auburn University
  • 1996 – 1997                Post-Doctoral Research Associate, Texas A&M University
  • 1995 – 1996                Design Instructor, Texas A&M University
  • 1991 – 1995                Research and Teaching Assistant, Texas A&M University
  • 1989 – 1991                Research and Residence Assistant, Auburn University
  • 1986 – 1989                Manufacturing Project Engineer, AIDC, Taiwan
  • 1984 – 1986                Manufacturing Engineer, Aerospace Industry Development Ctr, Taiwan

Publication

 

  • Kuo, Chi-Wei and Suh, C.S., (2017) “On The Dispersion and Attenuation of Guided Waves in Tubular Section with Multi-Layered Viscoelastic Coating – Part I: Axial Wave Propagation,” International Journal of Applied Mechanics, 9(1), Article Number: 1750001 and DOI: S1758825117500016.
  • Lin, Y., Liu S., Zhao X., Mao, E., Cao C., and Suh, C.S. (2017) “Fatigue Life Prediction of Engaging Spur Gears Using Power Density,” Proc. IMechE Part C: Journal of Mechanical Engineering Science.  doi:10.1177/0954406217751557
  • Dassanayake, A.V. and Suh, C.S., (2017) “Impact of Tool Geometry and Tool Feed on Machining Stability,” Vibration Testing and System Dynamics, 1(4), pp. 295-313.
  • Wu, X-H.., Song, Z.-H, Du, Y.-F, Mao, E.-R., and Suh, C.S., (2017) “A Time-Frequency PID Controller Design for Improved Anti-Interference Performance of A Solenoid Valve Applicable to Hydraulic Cylinder Actuation,” Vibration Testing and System Dynamics, 1(4), pp. 281-294.
  • Halfmann, E.B. and Suh, Suh, C.S., (2017) “On The Temporal and Spectral Characteristics of Micro-Milling Dynamics,” Vibration Testing and System Dynamics, 1(3), pp. 15-33.
  • Kuo, Chi-Wei and Suh, C.S., (2017) “On The Dispersion and Attenuation of Guided Waves in Tubular Section with Multi-Layered Viscoelastic Coating – Part II: Circumferential Wave Propagation,” International Journal of Applied Mechanics, 9(2), Article Number: 1750016 and DOI:10.1142/S1758825117500168.
  • Wang, X. and Suh, C.S., (2017) “Time-Frequency Based Field Oriented Control of Permanent Magnet Synchronous Motors,” International Journal of Dynamics and Control, DOI 10.1007/s40435-017-0327-5.
  • Kuo, Chi-Wei and Suh, C.S., (2017) “A Case of Mitigating Non-Autonomous Time-Delayed System with Cubic Order Feedback,” Journal of The Franklin Institute. DOI: doi.org/10.1016/j.jfranklin.2017.08.023.
  • Halfmann, E.B., Suh, C.S., and Hung, N.P., (2017) “Dynamics of Turning Operation Part I: Experimental Analysis Using Instantaneous Frequency,” Vibration Testing and System Dynamics, 1(1), pp. 15-33.
  • Halfmann, E.B., Suh, C.S., and Hung, N.P., (2017) “Dynamics of Turning Operation Part II: Model Validation and Stability at High Speed,” Vibration Testing and System Dynamics, 1(1), pp. 35-52.
  • Wu, X., Ma, S., Du, Y., Mao, E, Song, Z., and Suh, C.S., (2017) “On The Design and Physical Validation of A Time-Frequency Controller,” Control Theory and Applications (in Chinese), 34(3), pp. 329-336.
  • Yang, Chun-Lin and Suh, C.S. (2016) “Impact of Coupling Strength on Reaching Network Consensus,” Journal of Applied Nonlinear Dynamics. Accepted for publication. as of 11-01-2016.
  • Kuo, Chi-Wei and Suh, C.S., (2016) “Controlling Bifurcation and Dynamic Behavior in Vibro-Impact System.” Journal of Applied Nonlinear Dynamics, 5(2), pp. 169-184, 2016.
  • Wang, Xin and Suh, C.S., (2016) “Precision Concurrent Speed and Position Tracking of Brushed DC Motors using Nonlinear Time-Frequency Control.” Journal of Vibration and Control, DOI: 10.1177/1077546316628974.
  • Wang, Xin and Suh, C.S., (2016) “Nonlinear Time-Frequency Control of PM Synchronous Motor Instability Applicable to Electric Vehicle Application.”International Journal of Dynamics and Control, 4(4), pp. 400-412. DOI 10.1007/s40435-014-0145-y. 
  • Liu, M.-K., Halfmann, E.B., and Suh, C.S., (2014) “Multi-Dimensional Time-Frequency Control of Micro-Milling Instability,” Journal of Vibration and Control, 20(5), pp. 643–660.
  • Liu, M.-K., and Suh, C.S., (2014) “Simultaneous Time-Frequency Control of Friction-Induced Instability,” Journal of Applied Nonlinear Dynamics.”  3(3), pp. 227-243.
  • Liu, M.-K., and Suh, C.S., (2013) “Synchronization of Chaos in Simultaneous Time-Frequency Domain,” Applied Mathematical Modelling, 37, pp. 9524-9537.

 

Books:

  • (Book, Chinese Translation) Suh, C.S., and Liu, M.-K., Control of Cutting and Machining Instability: Time-Frequency Approach for Precision Micro and Nano Machining, China Machine Press, 2015.  ISBN13: 9787111511489.
  • (Book) Suh, C.S., and Liu, M.-K., Control of Cutting and Machining Instability: Time-Frequency Approach for Precision Micro and Nano Machining,John Wiley and Sons, 2013.  ISBN 978-1-118-37182-4.