Shiren (Edward) Wang

Professor - Industrial & Systems Engineering

Jill and Charles F. Milstead '60 Faculty Fellow

Phone: (979) 458-2357

E-mail: S.Wang@tamu.edu

Department Profile

Experience

2022-Present, Professor, Department of Industrial & System Engineering, joint appointment at the Dept. of Materials Science & Engineering, Department of Biomedical Engineering,  Texas A&M University.

2015- 2022  Associate Professor, Department of Industrial & System Engineering, joint appointment at the Dept. of Materials Science and Engineering, Dept. of Biomedical Engineering, Texas A&M University, College Station, TX 77843

2012- 2014   Associate Professor, Department of Industrial, Manufacturing and System Engineering (IMSE), Texas Tech University, Lubbock, TX 79409

2007-2012    Assistant Professor, Texas Tech University, Department of Industrial, Manufacturing and System Engineering (IMSE), Lubbock, TX 79409

2003-2006   Research Assistant, High-Performance Materials Institute, Florida State University, Tallahassee, FL 32310

1998-2001   Lecturer and Research Fellow, School of Materials Science &Engineering, Beijing University of Aeronautics & Astronautics, P. R. China

 

Education
2006 Ph.D. Industrial & Manufacturing Engineering/Nanomaterials processing, Florida State University
2002 Master of Science, Singapore-MIT alliance, Singapore

1998 Master of Engineering, Materials Science/Polymers, Beijing University of Aeronautics & Astronautics
1995 Bachelor of Engineering, Materials Science/Polymers, Beijing University of Aeronautics & Astronautics

 

Research Interests
Advanced Manufacturing, Bio/Nano-materials, Brain-inspired Artificial Intelligence, Decarbonization

 

Publications

  • R. Liu, J. Kim, P. Dhakal, A. Hou, C. Merkel, S. Wang, Flexible Low-operational voltage memristor via tuned polymer structure, Advanced Materials Technologies (Under Review)
  • W. Li, C. Gao, J. Ma, J. Qiu, S. Wang, Simultaneous enhancement of thermopower and ionic conductivity for N-type Fe(III/II) thermocell, Materials Today Energy (Under Review)
  • Yao Tang, Shengzhou Jin, Sai Zhang, Guan-Zhao Wu, Jia-Yin Wang, Ting Xu, Yu Wang, Daniel Unruh, Kazimierz Surowiec, Yanzhang Ma, Shiren Wang, Courtney Katz, Hongjun
    Liang, Yunze Li, Weilong Cong, and Guigen Li, Multilayer 3D Chiral Folding Polymers and Their Asymmetric Catalytic Assembly, Research, https://doi.org/10.34133/2022/9847949 (2022)
  • W. Li, J. Ma., J. Qiu, S. Wang, Thermocells for low-grade heat harvesting: challenge, progress and prospect, Materials Today Energy 27, 101032 (2022)
  • C. Gao, S. Wang, in-situ curing of 3D printing of freestanding thermoset, Journal of Advanced Manufacturing Processing DOI: https://doi.org/10.1002/amp2.10114(2022)
  • Z. Zhang, S. Wang, Catalyzed frontal polymerization-aided 3D printing of epoxy resins, Manufacturing Letters 2,100030 (2022)
  • Wei Li, Jun Ma, Santiago Garcia, Chongjie Gao, Ruochen Liu, Jingjing Qiu, Feng Zhao, Shiren Wang, Semi-shell Janus nanoparticles-enabled pH-responsive rod-shaped assembly for photothermal therapy, ACS Applied Nano Materials(5, 1, 871–880(2022)
  • Z. Zhang, R. Liu, Z. Pei, J. Qiu, S. Wang, Frontal polymerization-enabled 3D printing of short carbon fiber/DCPD composites, Journal of Manufacturing Processing 71, 753-762(2021)
  • Y. Liu, R. Liu, S. Wang, 4D Printing thermo-responsive polymers for environmentally-adaptive radiative cooling and warming, Journal of Advanced Manufacturing Processing
    https://doi.org/10.1002/amp2.10107(2021)
  • Z. Zhang, R. Liu, W. Li, Y. Liu, L. Zeng, J. Qiu, S. Wang, Direct Writing of continuous fiber/thermosetting composites with high strength and low energy consumption, Additive
    Manufacturing, 47, 102348(2021).
  • C. Gao, S. Wolff, S. Wang, Eco-friendly additive manufacturing of metal materials: energy efficiency and life cycle analysis, Journal of Manufacturing Systems, 60,459-472 (2021)
  • W. Li, Y. Liu, Z. Zhang, J. Qiu, S. Wang, Thermo-Osmotic Iongel-enabled high-efficiency harvesting of low-grade heat, Journal of Materials Chemistry A, 9, 15755 - 15765(2021)
  • Q. Wu, Z. Zhang, S. Wang & L. Zeng. Constrained varying coefficient model for time course experiments in soft tissue fabrication, Technometrics 63, 249-262(2021)
  • Y. Liu, Z. Zhang, S. Wang, Carbon nanopore-tailored water desalination, ACS ES&T Water ,1, 34-47(2021)
  • B. Wang, Z. Zhang, Z. Pei, S. Wang, Current progress of 3D printing of thermosets, Advanced Composites and Hybrids Materials 3, 462–472(2020)
  • Y. Liu, Z. Zhang, W. Li, R. Liu, J. Qiu, S. Wang, Water purification performance and energy consumption of nanocomposites membrane, Composites Part B 202, 108426(2020)
  • Y. Liu, Z. Zhang, W. Li, R. Liu, J. Qiu, S. Wang, Water purification performance and energy consumption of nanocomposites membrane, Composites Part B 202,108426(2020).
  • M. He, Y. Wang, S. Wang, S. Luo, Laser-Induced Graphene Enabled 1D Fiber Electronic, Carbon, 168, 308-318(2020)
  • J. Ma, J. Qiu, S. Wang, Catalytic nanozyme for cancer immunotherapy, ACS Applied Nano materials ,3, 4925-4943(2020)
  • X. Qian, R. Qiu, C. Lu, Y. Qiu, Z. Wu, S. Wang, K. Zhang, Cost-effective yarn-shaped litiumion battery with high wearability, ACS Omega, 5, 4697(2020)
  • Y. Zheng, Q. Zhang, S. Wang, K. Zhang, Carbon Nanotube Yarn based Thermoelectric Textiles for Harvesting Thermal Energy and Powering Electronics, J. of Mater. Chem. A, 8, 2984-2994 (2020)
  • S. Su, J. Wang, J. Qiu, R. Martinez-Aguilan, S. Sennoune, S. Wang, In vitro study of transportation of porphyrin immobilized graphene oxide through blood brain barrier, Materials Science and Engineering C , 107, 110313(2020)
  • J. Wang, J. Wei, S. Su, J. Qiu, Z. Hu, M. Hasan, E. Vargas, M. Pantoya, S. Wang, Thermalrecoverable Tough Hydrogels Enhanced by Porphyrin Functionalized Graphene Oxide, Nanomaterials, 9, 1487(2019)
  • Z. Zhang, S. Wang, Roll-to-roll manufacturing of wearable thermoelectric systems, Manufacturing Letters 21, 28-34(2019)
  • Z. Zhang, R. Liu, H. Zepeda, S. Wang, 3D printing of super-strong hydrogel for artificial meniscus, ACS Applied Polymer Materials ,1, 2023-2032(2019)
  • B. Wang, K. F. Arias, Z. Zhang, Y. Liu, Z. Jiang, H.-J. Sue, N. Currie-Gregg, S. Bouslog, ZJ Pei, S. Wang, 3D-printing of in-situ curing thermally insulated thermoset, Manufacturing Letters 21,1-6(2019)
  • C, Lu, J. Meng, J. Zhang, X. Chen, M. Du, Y. Chen, C. Hou, J. Wang, X. Wang, Y. Qiu, S. Wang, Kun Zhang, Three-Dimensional Hierarchically Porous Graphene Fiber Shaped Supercapacitors with High Specific Capacitance and Rate Capability, ACS Appl. Mater. Interfaces, 11, 25205-25217(2019)
  • J. Wang, J. Qiu, S. Wang, A novel and facie way to synthesize diamondoids nanowires cluster array, J. of Mater. Research, 2019, DOI: 10.1557/jmr.2019.197
  • J. Wang, S. Su, J. Qiu, S. Wang, One-dimensional fluorescent nanosized-diamond nanowires with fluorescent detection of Vitamin B12, Nano Brief reports and review, 2019, DOI: 10.1142S179329201950084X.
  • X. Zheng, L. Yao, Y. Qiu, S. Wang, K. Zhang, Core-sheath Porous Polyaniline Nanorods/Graphene Fiber-Shaped Supercapacitors with High Specific Capacitance and Rate Capability, ACS Applied Energy Materials, 2,4335-4344(2019)
  • Q. Wu, Z. Zhang, S. Wang & L. Zeng. Constrained varying coefficient model for time course experiments in soft tissue fabrication, Technometrics (accepted)
  • Y. Wen, J. Yuan, X. Ma, S. Wang, Y. Liu, Polymeric Nanocomposite Membranes for Water Treatment: a review, Environmental Chemistry Letters 17, 1539-1551(2019)
  • Z. Zhang, Q. Wu, L. Zeng & S. Wang*. Modelling-based assessment of 3D-printed meniscus transplantation, Healthcare 7,69(2019).
  • L. Wang, J. Zhang, Y. Guo, X. Jin, Q. Yang, S. Wang, Y. Qiu , Fabrication of core-shell nanostructured poly(3,4-ethylenedioxythiophene)/carbon nanotube nanohybrids with enhanced thermoelectric power factors, Carbon 148, 290-296(2019)
  • Y. Liu, B. Philips, W. Li, Z. Zhang, L. Fang, J. Qiu, S. Wang*, Fullerene-tailored graphene oxide interlayer spacing for energy-efficient water desalination, ACS Appl. Nano Mater., 1 (11), 6168-6175(2018)
  • L. Wang, Z. Zhang, Y. Liu, B. Wang, L. Fang, J. Qiu, K. Zhang, S. Wang*, Exceptional thermoelectric properties of flexible organic/inorganic hybrids with monodispersed and periodic nanophase, Nature Communication 9, 3817, (2018)
  • L. Wang, Z. Zhang, Linxiao Geng, Tianyu Yuan, Yuchen Liu, Juchen Guo, Lei Fang, Jingjing Qiu, S. Wang*, Solution-printable flexible n-type thermoelectrics, Energy & Environmental Science 11, 1307-1317(2018)
  • X. Hu, K. Zhang, J, Zhang, Y. Qiu, S. Wang*, Thermoelectric properties of conducting polymer nanowire-tellurium nanowire hybrids, ACS Applied Energy Materials 1, 4883 (2018)
  • N. Mao, W. Chen, J. Meng, K. Zhang, S. Wang, Y. Qiu, Enhanced electrochemical properties of hierarchically sheath-core aligned carbon nanofibers coated carbon fiber yarn electrode-based supercapacitor via polyaniline nanowire array modification, Journal of Power Sources 399, 406-413(2018)
  • J. Meng, W. Nie, K. Zhang, F. Xu, X. Ding, S. Wang, Y. Qiu, Enhancing electrochemical performance of graphene fiber-based supercapacitors by plasma treatment, ACS Applied Materials and Interfaces, 10, 13652-13659(2018)
  • Biran Wang, Liming Wang, Xi Li, Yuchen Liu, Zimeng Zhang, Erik Hedric, Stephen Safe, Jingjing Qiu, Guohui Lu, S. Wang*, Template-Free Fabrication of Vertically-Aligned Polymer Nanowire Array on the Flat-end Tip for Quantifying the Single Living Cancer Cells and Nanosurface Interaction, Manufacturing Letters, 16, 27-31(2018)
  • Jing Zhang, Kun Zhang, S. Wang, Thermoelectric transport in ultrathin poly(3,4-ethylenedioxythiophene) nanowire assembly, Composites Part B, 136, 234-240(2018)
  • Y. Lan, K. Zhang, Y. Qiu, S. Wang, Hierarchically porous sheath-core graphene-based fibershaped supercapacitors with high energy density, J. Materials Chemistry A, 6, 896-907(2018)